"I have the world's largest collection of seashells. I keep it on all the beaches of the world." - Steven Wright
<< Back

Scanmar rigging and wire sizes

Here is how the rigging on a Scanmar looks like accroding to the official documentation. Even though it's for SC33, in theory the rigging on the two boats is almost the same.

The wire thickness on our boat was one size up compared to this diagram, so we followed that when replacing the standing rigging.

Important to remember when rigging the boat:

  • Upper shrouds pass through the spreader's aft hole,
  • Lower shrouds go from the spreader bracket's aft hole.
  • Upper shrouds terminate on the aft hole of the chainplate.

Scanmar 33 rigging wire sizes